Sign in Register
Copied to clipboard

Flag this post as spam?

This post will be reported to the moderators as potential spam to be looked at


  • Michael 5 posts 75 karma points
    Nov 21, 2017 @ 02:05
    Michael
    0

    Ugrading to 7.7.6: Invalid object name 'umbracoUser2UserGroup'.

    Hi,

    I'm attempting to do a manual (no nuget) upgrade from Umbraco 7.5.3 to 7.7.6. I get the following exception when attempting to log into the 'Authorize Upgrade' screen. The login fails.

    useLegacyEncoding was left set to true. umbracoConfigurationStatus is 7.5.3.

    Can anyone help?

     2017-11-21 11:49:19,371 [P9124/D9/T39] INFO  Umbraco.Core.UmbracoApplicationBase - Application shutdown. Details: ConfigurationChange

_shutDownMessage=CONFIG change
HostingEnvironment initiated shutdown
CONFIG change
HostingEnvironment caused shutdown

_shutDownStack=   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
   at System.Environment.get_StackTrace()
   at System.Web.Hosting.HostingEnvironment.InitiateShutdownInternal()
   at System.Web.Hosting.HostingEnvironment.InitiateShutdownWithoutDemand()
   at System.Web.HttpRuntime.ShutdownAppDomain(String stackTrace)
   at System.Web.Configuration.HttpConfigurationSystem.OnConfigurationChanged(Object sender, InternalConfigEventArgs e)
   at System.Configuration.Internal.InternalConfigRoot.OnConfigChanged(InternalConfigEventArgs e)
   at System.Configuration.BaseConfigurationRecord.OnStreamChanged(String streamname)
   at System.Web.DirectoryMonitor.FireNotifications()
   at System.Web.Util.WorkItem.CallCallbackWithAssert(WorkItemCallback callback)
   at System.Web.Util.WorkItem.OnQueueUserWorkItemCompletion(Object state)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()
 2017-11-21 11:49:31,133 [P9124/D10/T44] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (24346e38).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:49:31,155 [P9124/D10/T44] INFO  Umbraco.Core.Security.BackOfficeSignInManager - Event Id: 0, state: Login attempt failed for username [email protected] from IP address 192.168.0.24
 2017-11-21 11:52:55,825 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (d247b664).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:52:55,991 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (a5a20226).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:52:56,022 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (0be70b0e).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:52:56,053 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (3dbef76b).
System.Data.SqlClient.SqlException (0x80131904): Invalid column name 'createDate'.
Invalid column name 'updateDate'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass2_0.<ExecuteNonQueryWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.Update(String tableName, String primaryKeyName, Object poco, Object primaryKeyValue, IEnumerable`1 columns)
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:207,State:1,Class:16
 2017-11-21 11:52:56,070 [P9124/D10/T17] WARN  Umbraco.Core.Services.UserService - An error occurred attempting to save a user instance during upgrade, normally this warning can be ignored. Exception: System.Data.SqlClient.SqlException (0x80131904): Invalid column name 'createDate'.
Invalid column name 'updateDate'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass2_0.<ExecuteNonQueryWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.Update(String tableName, String primaryKeyName, Object poco, Object primaryKeyValue, IEnumerable`1 columns)
   at Umbraco.Core.Persistence.Database.Update(Object poco, Object primaryKeyValue, IEnumerable`1 columns)
   at Umbraco.Core.Persistence.Repositories.UserRepository.PersistUpdatedItem(IUser entity)
   at Umbraco.Core.Cache.DefaultRepositoryCachePolicy`2.Update(TEntity entity, Action`1 persistUpdated)
   at Umbraco.Core.Persistence.UnitOfWork.ScopeUnitOfWork.Commit(Action`1 transactionCompleting)
   at Umbraco.Core.Services.UserService.Save(IUser entity, Boolean raiseEvents)
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:207,State:1,Class:16
 2017-11-21 11:52:56,078 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (4838699c).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:52:56,100 [P9124/D10/T17] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (9f62d55b).
System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUser2UserGroup'.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass5_0.<ExecuteReaderWithRetry>b__0()
   at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func`1 func)
   at Umbraco.Core.Persistence.Database.<Query>d__115`1.MoveNext()
ClientConnectionId:4d254041-bb9b-4946-9de3-664939ebde25
Error Number:208,State:1,Class:16
 2017-11-21 11:52:56,119 [P9124/D10/T17] INFO  Umbraco.Core.Security.BackOfficeSignInManager - Event Id: 0, state: Login attempt failed for username USERNAME from IP address 192.168.0.24
    Copy Link
  • Michael 5 posts 75 karma points
    Nov 23, 2017 @ 08:36
    Michael
    0

    Bumping this due to just being approved.

    Can anyone help?

    Copy Link
  • Steve Morgan 1349 posts 4459 karma points c-trib
    Nov 23, 2017 @ 10:19
    Steve Morgan
    0

    Hi,

    Have you got a locked down DB user in your web.config string? I had issues on upgrade to V7.7 due to the DB user not being SA. It was trying to delete the old user tables and failed.

    Try bumping the web.config up with an sa user - rerun the upgrade and see if that works for you too.

    HTH

    Steve

    Copy Link
  • Ben Palmer 180 posts 866 karma points c-trib
    Nov 23, 2017 @ 20:55
    Ben Palmer
    0

    Hi Michael,

    It's hard to be sure and you should probably backup your code and database before following this advice but when I've run into similar issues in the past - it's come down to migrations not being applied properly.

    Have you manually edited the database at any point?

    Regardless of that, try changing umbracoConfigurationStatus to 7.2.8 and run the install again. This will make all of the migrations run properly, in order and make sure you database integrity is correct.

    Good luck!

    Copy Link
  • Hiren Oza 15 posts 87 karma points
    Nov 24, 2017 @ 05:28
    Hiren Oza
    1

    Execute following script manually.(This script is for MySql. If you are using other db then you will have to create script according to it)

    CREATE TABLE umbracouser2usergroup ( userId INT (11), userGroupId INT (11) ); INSERT INTO umbracouser2usergroup (userId, userGroupId) VALUES('0','1');

    If you get another error after executing above script then execute following scripts:

    CREATE TABLE umbracousergroup ( id INT (11), userGroupAlias VARCHAR (600), userGroupName VARCHAR (600), userGroupDefaultPermissions VARCHAR (150), createDate TIMESTAMP , updateDate TIMESTAMP , icon VARCHAR (765), startContentId INT (11), startMediaId INT (11) ); INSERT INTO umbracousergroup (id, userGroupAlias, userGroupName, userGroupDefaultPermissions, createDate, updateDate, icon, startContentId, startMediaId) VALUES('1','admin','Administrators','CADMOSKTPIURZ:5F7ï','2017-11-06 15:07:21','2017-11-06 15:07:21','icon-medal','-1','-1'); INSERT INTO umbracousergroup (id, userGroupAlias, userGroupName, userGroupDefaultPermissions, createDate, updateDate, icon, startContentId, startMediaId) VALUES('2','writer','Writers','CAH:F','2017-11-06 15:07:21','2017-11-06 15:07:21','icon-edit','-1','-1'); INSERT INTO umbracousergroup (id, userGroupAlias, userGroupName, userGroupDefaultPermissions, createDate, updateDate, icon, startContentId, startMediaId) VALUES('3','editor','Editors','CADMOSKTPUZ:5Fï','2017-11-06 15:07:21','2017-11-06 15:07:21','icon-tools','-1','-1'); INSERT INTO umbracousergroup (id, userGroupAlias, userGroupName, userGroupDefaultPermissions, createDate, updateDate, icon, startContentId, startMediaId) VALUES('4','translator','Translators','AF','2017-11-06 15:07:21','2017-11-06 15:07:21','icon-globe','-1','-1');

    REATE TABLE umbracouser2usergroup ( userId INT (11), userGroupId INT (11) ); INSERT INTO umbracouser2usergroup (userId, userGroupId) VALUES('0','1');

    CREATE TABLE umbracousergroup2app ( userGroupId INT (11), app VARCHAR (150) ); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','content'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','developer'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','forms'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','media'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','member'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','settings'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('1','users'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('2','content'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('3','content'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('3','forms'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('3','media'); INSERT INTO umbracousergroup2app (userGroupId, app) VALUES('4','translation');

    CREATE TABLE umbracousergroup2nodepermission ( userGroupId INT (11), nodeId INT (11), permission VARCHAR (765) );

    CREATE TABLE umbracouserstartnode ( id INT (11), userId INT (11), startNode INT (11), startNodeType INT (11) );

    Copy Link
  • Barb Romito 12 posts 74 karma points
    Mar 22, 2018 @ 14:16
    Barb Romito
    0

    I am attempting to upgrade to v7.8.1 from v7.6.4. We tried to run the 1st script you mentioned which did not work So we moved onto the 2nd script.

    We are getting the following error:

    2018-03-22 10:01:34,306 [P3840/D4/T20] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (26a44242). System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUserGroup'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>cDisplayClass50.0() at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func1 func) at Umbraco.Core.Persistence.Database.<Query>d__1151.MoveNext() ClientConnectionId:d97e3665-f8bc-47a2-b177-fbff6b99b53f Error Number:208,State:1,Class:16 2018-03-22 10:01:34,359 [P3840/D4/T20] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (227e304b). System.Data.SqlClient.SqlException (0x80131904): Invalid column name 'createDate'. Invalid column name 'updateDate'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>c__DisplayClass2_0.<ExecuteNonQueryWithRetry>b__0() at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func1 func) at Umbraco.Core.Persistence.Database.Update(String tableName, String primaryKeyName, Object poco, Object primaryKeyValue, IEnumerable1 columns) ClientConnectionId:d97e3665-f8bc-47a2-b177-fbff6b99b53f Error Number:207,State:1,Class:16 2018-03-22 10:01:34,359 [P3840/D4/T20] WARN Umbraco.Core.Services.UserService - An error occurred attempting to save a user instance during upgrade, normally this warning can be ignored. Exception: System.Data.SqlClient.SqlException (0x80131904): Invalid column name 'createDate'. Invalid column name 'updateDate'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>cDisplayClass20.0() at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func1 func) at Umbraco.Core.Persistence.Database.Update(String tableName, String primaryKeyName, Object poco, Object primaryKeyValue, IEnumerable1 columns) at Umbraco.Core.Persistence.Database.Update(Object poco, Object primaryKeyValue, IEnumerable1 columns) at Umbraco.Core.Persistence.Repositories.UserRepository.PersistUpdatedItem(IUser entity) at Umbraco.Core.Cache.DefaultRepositoryCachePolicy2.Update(TEntity entity, Action1 persistUpdated) at Umbraco.Core.Persistence.UnitOfWork.ScopeUnitOfWork.Commit(Action1 transactionCompleting) at Umbraco.Core.Services.UserService.Save(IUser entity, Boolean raiseEvents) ClientConnectionId:d97e3665-f8bc-47a2-b177-fbff6b99b53f Error Number:207,State:1,Class:16 2018-03-22 10:01:34,359 [P3840/D4/T20] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (94f6ae08). System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUserGroup'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>cDisplayClass50.0() at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func1 func) at Umbraco.Core.Persistence.Database.<Query>d__1151.MoveNext() ClientConnectionId:d97e3665-f8bc-47a2-b177-fbff6b99b53f Error Number:208,State:1,Class:16 2018-03-22 10:01:34,390 [P3840/D4/T20] ERROR Umbraco.Core.Persistence.UmbracoDatabase - Exception (8351bbaa). System.Data.SqlClient.SqlException (0x80131904): Invalid object name 'umbracoUserGroup'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData() at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString, Boolean isInternal, Boolean forDescribeParameterEncryption) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, Boolean inRetry, SqlDataReader ds, Boolean describeParameterEncryptionRequest) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource1 completion, Int32 timeout, Task& task, Boolean& usedCache, Boolean asyncWrite, Boolean inRetry) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method) at Umbraco.Core.Persistence.PetaPocoCommandExtensions.<>cDisplayClass50.0() at Umbraco.Core.Persistence.FaultHandling.RetryPolicy.ExecuteAction[TResult](Func1 func) at Umbraco.Core.Persistence.Database.<Query>d__1151.MoveNext() ClientConnectionId:d97e3665-f8bc-47a2-b177-fbff6b99b53f Error Number:208,State:1,Class:16 2018-03-22 10:01:34,421 [P3840/D4/T20] INFO Umbraco.Core.Security.BackOfficeSignInManager - Event Id: 0, state: Login attempt failed for username Admin from IP address 10.94.7.79 2018-03-22 10:01:39,437 [P3840/D3/T17] INFO Umbraco.Core.UmbracoApplicationBase - Application shutdown. Details: ConfigurationChange

    _shutDownMessage=CONFIG change HostingEnvironment initiated shutdown CONFIG change HostingEnvironment caused shutdown

    shutDownStack= at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo) at System.Environment.getStackTrace() at System.Web.Hosting.HostingEnvironment.InitiateShutdownInternal() at System.Web.Hosting.HostingEnvironment.InitiateShutdownWithoutDemand() at System.Web.HttpRuntime.ShutdownAppDomain(String stackTrace) at System.Web.Configuration.HttpConfigurationSystem.OnConfigurationChanged(Object sender, InternalConfigEventArgs e) at System.Configuration.Internal.InternalConfigRoot.OnConfigChanged(InternalConfigEventArgs e) at System.Configuration.BaseConfigurationRecord.OnStreamChanged(String streamname) at System.Web.DirectoryMonitor.FireNotifications() at System.Web.Util.WorkItem.CallCallbackWithAssert(WorkItemCallback callback) at System.Web.Util.WorkItem.OnQueueUserWorkItemCompletion(Object state) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() at System.Threading.ThreadPoolWorkQueue.Dispatch()

    Copy Link
  • Michael 5 posts 75 karma points
    Nov 27, 2017 @ 23:30
    Michael
    0

    Hi all,

    Thanks heaps for the replies. The sa user is what helped I think, but never had this problem before so rather confusing.

    Copy Link
  • Steve Morgan 1349 posts 4459 karma points c-trib
    Nov 29, 2017 @ 22:55
    Steve Morgan
    0

    Most upgrades don't attempt to drop tables. I suspect that's why we're hitting it on this release! The old user tables are removed.

    Steve

    Copy Link
  • Alex Brown 129 posts 620 karma points
    Nov 28, 2017 @ 08:12
    Alex Brown
    0

    I had this issue when restoring a database from 7.7.6 over a release version of 7.5.13 (difference between environments). Just thought I'd pop this info in here.

    Copy Link
  • Jeroen Breuer 4908 posts 12265 karma points MVP 5x admin c-trib
    Mar 05, 2018 @ 13:32
    Jeroen Breuer
    0

    I have a similar issue, but the solution provided here didn't work. Could anybody help?

    https://our.umbraco.org/forum/using-umbraco-and-getting-started/90947-installer-not-working-upgrading-from-756-to-792

    Jeroen

    Copy Link
  • Markus Johansson 1938 posts 5866 karma points MVP 2x c-trib
    Jul 31, 2018 @ 12:06
    Markus Johansson
    1

    Just wanted to share that the the solution for me was to first go to 7.7.13 and then to latest version (at the moment 7.11.1)

    Copy Link
  • Alex Skrypnyk 6175 posts 24186 karma points MVP 8x admin c-trib
    Sep 19, 2018 @ 21:26
    Alex Skrypnyk
    0

    Thanks Markus, your way works!

    Copy Link
  • Pramod Bhagat 9 posts 79 karma points
    Sep 26, 2018 @ 05:01
    Pramod Bhagat
    0

    Hi,

    Even I'm getting this error with missing DB objects (Invalid object name 'umbracoUser2UserGroup') while upgrading from v6.1.6 to v7.12.3. Should we be creating these DB tables manually? There isn't any DB scripts for the upgrade in the documentation or am I missing anything?

    Appreciate your help.

    Thanks,

    Pramod

    Copy Link
  • MickTemp 27 posts 109 karma points
    Sep 26, 2018 @ 05:21
    MickTemp
    0

    Hi Pramod,

    I'm unsure if there's any specific requirements when it comes to upgrading from v6 to v7, but I would suggest upgrading to 7.7.13 first as per Markus Johansson's suggestion. Once this is successful, go from that version to 7.12.3. I've had generally good success doing this.

    Copy Link
  • Alex Skrypnyk 6175 posts 24186 karma points MVP 8x admin c-trib
    Sep 26, 2018 @ 07:35
    Alex Skrypnyk
    0

    Hi

    I upgrade to 7.6.13 and then to 7.7.13. This way works without problems.

    Thanks,

    Alex

    Copy Link
  • Pramod Bhagat 9 posts 79 karma points
    Sep 27, 2018 @ 10:05
    Pramod Bhagat
    0

    Hi Mick and Alex,

    Thank you for your response.

    I've now upgraded from 6.1.6 to 7.6.13 and then to 7.7.13 and finally to 7.12.13 (current latest version).

    I've however had an issue with the Missing default Member Types 'Member' details in the below post.

    Has anyone encountered this issue? Looks like some missing configuration though.

    https://our.umbraco.com/forum/using-umbraco-and-getting-started/93913-missing-default-member-types-member-after-upgrade-from-616-to-71213

    Thanks,

    Pramod

    Copy Link
Please Sign in or register to post replies

Write your reply to:

Draft