Hi M

At first look, it appears that uShare is still using "publishstream" instead of "publishactions" and that the former might have now finally been deprecated. I'll need to update the source and upload a new package or alternatively you can do this yourself by grabbing the source here. You'll have to change Governor.Umbraco.uShare.UI.ProviderAuthPages line 92. Or if you want, please email me at rigardt @ governor . co . uk then I can send you an updated package for 7.1.1.

Regards,

Rigardt

Hi Rigardt,

Thank you for your quick reply. I've did this and then just replaced Governor.Umbraco.uShare.dll in bin folder by the new dll.

I ended up with a FileNotFoundException, frankly speaking I dont know if this is the correct way or I should package someway else.

Would be great if you can send me an updated pakage at moe.ghandour[at]outlook.com

Thank you so much.

M

Hi M

Yes, you need to run the /BuildPackage/BuildPackage.cmd. This will create the Umbraco package with the single Governor.Umbraco.uShare.dll which you should be able to replace in the bin as above (after renaming it from the GUID filename). The difference between this and just building the solution is that this will use ILMerge to create a single Governor.Umbraco.uShare.dll by merging all the project assemblies. In your case you only had the one project's assembly, hence the exception.

If this fails again, let me know and I'll email it over.

Rigardt

Hello Rigardt,

Thank you so much, I managed updating the package, yet still struggling with publishing the Facebook app :( this is something new for me. I tried to post from twitter to facebook just to avoid this, but apparently even twitter standard facebook app is not being able to post to my page.

Best,

M

Hi M

It sounds like the original uShare issue is fixed at least right? I'll upload a new package at some point soon.

Rigardt

Hello Rigardt,

Yes, uShare issue fixed.

Thank you so much!

M

Hello ... I have the same problem ... the source code doesn't seem to be available at that link?

Hi Guy

The source should be at that link: https://ushare.codeplex.com/SourceControl/latest

Be sure to pick the correct branch depending on your version please.

Rigardt

Hello ... I managed to find the source code. Thank you.

Unfortunately, I can't run buildpackage.cmd. I think it's because I have VS2013 installed.

Guy

Hi Guy

VS2013 should be fine. What errors are you getting when trying to build?

Rigardt

Build FAILED.

   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\BuildPackage\BuildPackage.msbuild" (default target) (1) ->
   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.sln" (default target) (2) ->
   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.Installer\Governor.Umbraco.uShare.Installer.csproj" (default target) (5) ->
     C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.Installer\Governor.Umbraco.uShare.Installer.csproj(278,3): error MSB4019: The imported project
    "C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the <Import> declaration is correct, and
    that the file exists on disk.


   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\BuildPackage\BuildPackage.msbuild" (default target) (1) ->
   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.sln" (default target) (2) ->
   "C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.UI\Governor.Umbraco.uShare.UI.csproj" (default target) (6) ->
     C:\Users\gm10\Downloads\ushare-c7d0d9b6d988979b27f9ffbd9fd65db55786ee3a\Governor.Umbraco.uShare.UI\Governor.Umbraco.uShare.UI.csproj(305,3): error MSB4019: The imported project "C:\Program F
   iles (x86)\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets" was not found. Confirm that the path in the <Import> declaration is correct, and that the file
    exists on disk.

0 Warning(s)
2 Error(s)

I have those missing files on my PC, but they are in a /v12.0 directory instead of v11.0

Hi Guy

Can you try copying the missing file into v11.0 and see if that fixes the build?

Rigardt

Yes that actually worked.

However, after clicking all the Facebook OK's (which I didn't get before), I was still presented with an error ...

Server Error in '/' Application.

    Facebook access token not authorized.

    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. 

    Exception Details: Governor.Umbraco.uShare.Exceptions.NotAuthorizedException: Facebook access token not authorized.

    Source Error: 

    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.

    Stack Trace: 


    [NotAuthorizedException: Facebook access token not authorized.]
       Governor.Umbraco.uShare.OAuth2.ServiceProviderConsumers.FacebookConsumer.GetPageAccessToken(String pageUsernameOrId, String userAccessToken) +271
       Governor.Umbraco.uShare.UI.ProviderAuthPages.uShareFacebook.Page_Load(Object sender, EventArgs e) +474
       System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +85
       System.Web.UI.Control.OnLoad(EventArgs e) +79
       Umbraco.Web.UI.Pages.BasePage.OnLoad(EventArgs e) +15
       System.Web.UI.Control.LoadRecursive() +130
       System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2822

I'm not sure about my faceboot app settings. I tried to follow your guide, but the Facebook Developer interface has changed a bit since you wrote your guide, I think.

Thanks for your help.

Hi Guy

I've removed the legacy Facebook permission from the package and uploaded some new versions. Please grab the correct version and give this a try and let me know if this fixes the issue.

Best, Rigardt

Hi Rigardt, thanks for uploading the newest version.

I uninstalled that previous package, and installed this one, but I still get the same error message (Facebook access token not authorized).

Do you happen to know what app permissions i should set on Facebook?

Also, the FB user I am using, is also the Admin for the app, could that be a problem?

is working on a reply...