What datatypes are in your fieldset? At first glance it looks like you're using one that has an UpdatePanel that doesn't like being moved around. Let me know and I'll do some testing and see if there's anything that can be done
Hmm, I didn't think URL Picker used UpdatePanels, unless you're using the really old version? It seems to be working here with 3.1.2
However I can reproduce the same error with the Related Links datatype, which does use an UpdatePanel. I'll need to do some research and see if there's anything that can be done - currently I'm moving the control to a different parent which it sounds like may not be supported by UpdatePanel, maybe I can find a workaround or alternative though. It may take me a few days to get to this, I'll post back here as soon as I can. In the meantime, if you're keen to take a stab, the source is on Github. Otherwise for now you'll need to remove the Fieldset from this datatype.
Cannot unregister UpdatePanel with ID 'prop_linkURL' since it was not registered with the ScriptManager. This might occur if the UpdatePanel was removed from the control tree and later added again, which is not supported. Parameter name: updatePanel
This is on a fieldset with the following data types: Textbox multiple, Textstring, Related Links
*** UPDATE *** Forgot to mention that it's the Related Links data type causing this error & that this isn't an urgent issue - we have installed uComponents and are using the URL Picker as it better suits our requirements.
Just an update, I've been looking into the issue and managed to find a workaround where the controls will at least load, but it seems data is not saving in the Related Links datatype. I'll keep looking into it and post back here as soon as I figure something out! Or if you have any ideas let me know
I had a similar problem with another package (Page Notifications) that broke Related Links saving. I came to the conclusion it was because of the on-the-fly change to the controls collection and came up with a way to inject the HTML required using jQuery.
While it would be a bit of work - the same approach could probably be used here.
Not at the moment, still working through this. As an alternative though, you can use the "Multi URL Picker" which gives you the same (and more) features of the Related Media datatype.
thanks a lot for the fast response. I've got it working on another installation now and the package is really useful. I will try it again with this installation after replacing the Related Media datatype.
Unfortunately not. I've tried a few different workarounds but each seem to introduce other issues.
I've tried manually re-registering controls with UpdatePanels as described here and here, which gets around the YSOD, but then the click events on each control don't seem to work properly. I've also tried doing it client-side with jQuery and running into similar issues.
I'm happy to post up what I've been trying to a WIP branch in case anyone wants to help figure this one out? I think I'm out of ideas unfortunately :(
Cannot unregister UpdatePanel with ID 'upUrls' since it was not registered with the ScriptManager
Just installed this package and create some properties with 2 Fieldsets and getting this error:
Hey Stefan,
What datatypes are in your fieldset? At first glance it looks like you're using one that has an UpdatePanel that doesn't like being moved around. Let me know and I'll do some testing and see if there's anything that can be done
Thanks,
Tom
It's the uComponents URL Picker.
Hmm, I didn't think URL Picker used UpdatePanels, unless you're using the really old version? It seems to be working here with 3.1.2
However I can reproduce the same error with the Related Links datatype, which does use an UpdatePanel. I'll need to do some research and see if there's anything that can be done - currently I'm moving the control to a different parent which it sounds like may not be supported by UpdatePanel, maybe I can find a workaround or alternative though. It may take me a few days to get to this, I'll post back here as soon as I can. In the meantime, if you're keen to take a stab, the source is on Github. Otherwise for now you'll need to remove the Fieldset from this datatype.
Thanks,
Tom
Ah woops, it's my own 301 URL Tracker datatype :P
Ahh, thanks - I'll make sure to test with that too if I come up with something
Hi Tom,
We're getting a similar error:
Cannot unregister UpdatePanel with ID 'prop_linkURL' since it was not registered with the ScriptManager. This might occur if the UpdatePanel was removed from the control tree and later added again, which is not supported.
Parameter name: updatePanel
This is on a fieldset with the following data types: Textbox multiple, Textstring, Related Links
*** UPDATE *** Forgot to mention that it's the Related Links data type causing this error & that this isn't an urgent issue - we have installed uComponents and are using the URL Picker as it better suits our requirements.
Get the same error with RelatedLinks datatype. I like this package but can't use it on my base doctype because of this.
Hi All,
Just an update, I've been looking into the issue and managed to find a workaround where the controls will at least load, but it seems data is not saving in the Related Links datatype. I'll keep looking into it and post back here as soon as I figure something out! Or if you have any ideas let me know
Thanks,
Tom
FYI this also occurs with Ultimate Pickers
I had a similar problem with another package (Page Notifications) that broke Related Links saving. I came to the conclusion it was because of the on-the-fly change to the controls collection and came up with a way to inject the HTML required using jQuery.
While it would be a bit of work - the same approach could probably be used here.
More info: http://our.umbraco.org/projects/backoffice-extensions/ucomponents/questionssuggestions/17994-Related-Links-with-Media-Won%27t-Save-Links
Cheers, Adam.
Hi Tom,
I really like your package, but do get the same error with the Related-Media Datatype. Is there anything new about this issue?
Thanks a lot. Kind regards,Nora
Hi Nora,
Not at the moment, still working through this. As an alternative though, you can use the "Multi URL Picker" which gives you the same (and more) features of the Related Media datatype.
-Tom
Hi Tom,
thanks a lot for the fast response. I've got it working on another installation now and the package is really useful. I will try it again with this installation after replacing the Related Media datatype.
Thank you. Kind regards.
Having the same problem with Char Limit: http://our.umbraco.org/projects/backoffice-extensions/char-limit
Just to let you know :)
Any luck with this issue? I'm currently having the same problem. I'm using 6.0.2 and the dataType is Related Links.
Thanks!
Hi guys.
Has the issue been solved?
Unfortunately not. I've tried a few different workarounds but each seem to introduce other issues.
I've tried manually re-registering controls with UpdatePanels as described here and here, which gets around the YSOD, but then the click events on each control don't seem to work properly. I've also tried doing it client-side with jQuery and running into similar issues.
I'm happy to post up what I've been trying to a WIP branch in case anyone wants to help figure this one out? I think I'm out of ideas unfortunately :(
-Tom
is working on a reply...
This forum is in read-only mode while we transition to the new forum.
You can continue this topic on the new forum by tapping the "Continue discussion" link below.